Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
See the difference
Before
After
Before
After
Before
AfterHow Much Does Chimney Cap & Crown Cost in North Hollywood?
In North Hollywood, a chimney cap installation typically runs $185 to $520, and a crown repair or rebuild usually lands between $340 and $1,450 depending on how much of the crown is failing. A full crown rebuild on a wider masonry chimney sits at the top of that range; a small crack sealed with a crown coating sits near the bottom. Those are typical ranges for this market in 2026, and the written estimate from your contractor sets the final price.
One thing worth knowing right away: the cap and the crown do different jobs, and they fail for different reasons. A cap keeps water, birds, and debris out of the flue opening. A crown is the sloped concrete top that sheds water off the masonry itself. A cracked crown lets water into the brick and mortar below it, and that water damage is far more expensive to fix than the crown. Catching either one early is the whole game.
Key Takeaways
- A standard single-flue cap: roughly $185 to $420 installed.
- A multi-flue or custom cap: roughly $340 to $720.
- Crown coating over hairline cracks: roughly $340 to $620.
- Full crown rebuild: roughly $850 to $1,450.
- Free estimates, and we repair what we find, so you’re not handed an inspection report and a phone number for someone else.
Chimney Cap & Crown Cost Breakdown (2026)
The table below shows what each piece of work tends to run for a typical North Hollywood home. Ranges assume a standard single-flue masonry fireplace unless the line says otherwise.
| Work | Typical Cost Range |
|---|---|
| Standard single-flue cap (Gelco-style, stainless or galvanized) | $185 – $420 |
| Multi-flue cap or custom-fabricated cap | $340 – $720 |
| Cap with animal guard / spark screen | $220 – $470 |
| Crown coating / sealant over hairline cracks | $340 – $620 |
| Partial crown repair (patching one section) | $480 – $850 |
| Full crown rebuild (form and pour over the full chimney top) | $850 – $1,450 |
| Cap and crown done together during a repair visit | $650 – $1,750 |
What pushes the number up or down? Size and shape matter most. North Hollywood has a real mix of housing stock, from 1920s bungalows with narrow single-flue brick chimneys to mid-century ranch homes with wider fireboxes and sometimes two flues. A two-flue chimney needs a wider cap, and that costs more than a single-flue unit. Access matters too. A chimney that’s easy to reach from a low roof or from a ladder with clear footing takes less time and labor than one hemmed in by steep pitch or tight spacing. The material you choose is the third lever: a galvanized cap will do the job but a stainless or copper unit lasts longer and costs more. None of these are add-ons pushed to inflate a bill. They’re the actual variables, and the estimate should list them plainly.
What Affects Chimney Cap & Crown Pricing in North Hollywood
- Number of flues. One flue means one cap. Two flues on the same chimney need a wider, sometimes custom cap, which adds to the price and the labor.
- Chimney height and roof pitch. A tall chimney on a steep roof takes more setup and more time to work safely. A ranch-style home with a shallow pitch is quicker and less expensive to service.
- How much of the crown is failing. A hairline crack can be sealed with a crown coating. A crown that’s spalling or separating from the flue needs a rebuild, and that jumps the price.
- Cap material. Galvanized is the lower-cost option. Stainless steel and copper cost more up front but resist rust and hold up longer in Southern California’s dry, sunny heat.
- Whether the repair is part of a larger job. If we’re already on the roof doing a chimney sweep and inspection, adding a cap or sealing a crown saves a separate visit and often a few labor hours.
- Masonry condition below the crown. Sometimes the crack in the crown is a symptom, not the cause. Water that’s been getting into the brick reveals itself when the crown comes off, and that repair adds cost.
One local factor specific to this area: North Hollywood summers are hot and dry, and the sun beats hard on masonry. That cycling between dry heat and the occasional heavy winter rain stresses the concrete crown and can open small cracks over time. It’s not dramatic, but it’s why we see crown issues here more often than you might guess on older homes. A cap helps protect the crown and the flue from the worst of it.
What’s Actually Involved in a Cap or Crown Job
A chimney cap install is usually the shorter job. We measure the flue opening, confirm the cap fits snugly with the right clearance, and mount it so it sits level and vents correctly. A cap that’s too tight chokes the draft; one that’s too loose doesn’t keep out animals. Getting the fit right is most of the work. Gelco caps and similar contractor-grade hardware are what we stock because a stamped big-box cover won’t hold up the same way over the years.
A crown job is more involved. The old crown has to come off, the chimney top has to be cleaned and prepped, and on a rebuild, a new form is set and fresh material poured and sloped so water runs off instead of pooling. Proper slope is the whole point. A flat crown traps water and fails again fast. Crown coating, by contrast, is a brush-or-trowel application over a cleaned, sound surface to seal hairline cracks and add a protective layer, and it’s a good fit when the crown is cracked but not structurally gone.
Safety matters here. Crown work on a residential roof is a height job. It’s not a task for a homeowner on a ladder, especially on a pitched roof or a two-story home. The work involves working at the top of the chimney over a fall hazard, and this is exactly the kind of job a trained professional should handle. We also look at the flue liner and the crown together, because a failing crown often means water has reached the liner. If we find a deteriorated liner, we can restore it with HeatShield ceramic restorative rather than reline the whole thing, and in some cases a full DuraFlex liner is the right fix. Finding it and fixing it in the same visit is why we handle the whole system, not just the cap.
How to Save on Chimney Cap & Crown
A few practical ways to keep the cost down without cutting corners:
- Get the cap and crown done together. If both need attention, one visit saves a separate dispatch and often some labor. We quote the combined job plainly so you can see the savings.
- Fix the crown while it’s small. A crown coating on hairline cracks is a fraction of the cost of a full rebuild. Waiting until the crack widens and the crown separates is the expensive path.
- Have the work done during a scheduled sweep. Pairing a cap install with an annual sweep and inspection spreads the labor across one visit.
- Choose the right material for the job, not the most expensive one. A galvanized cap on a low-draft chimney that’s out of the weather does fine. Save the stainless or copper for chimneys where longevity actually pays off.
- Ask for a written itemized estimate. Our estimates are free, and the written estimate sets the final price. Call (833) 589-9860 and we’ll put it in writing.
Can You Fix a Crown Without Rebuilding It?
Yes, often. If the crown has hairline surface cracks and the masonry below is sound, a crown coating can seal it and add a protective layer at the lower end of the range. If the crown is spalling, separating from the flue, or has cracks wide enough to let real water in, a rebuild is the honest fix. Ask your contractor to show you what they’re seeing before they recommend one over the other. When we’re on the roof, we’ll tell you which one your chimney actually needs. Call (833) 589-9860 for a free estimate, and we answer 24/7.
Is It Cheaper to Repair or Replace a Chimney Cap?
For almost every cap, replacement is the cheaper and smarter choice. Caps are not repaired in place; they’re replaced. A standard single-flue cap replacement runs $185 to $420 installed, and a multi-flue sits around $340 to $720. Trying to patch a rusted or damaged cap costs nearly as much as replacing it and leaves you with the same failing unit. When you call for a free estimate, we’ll tell you if a repair is even an option, but most of the time we replace. Call (833) 589-9860.
Do You Offer Same-Day Chimney Cap & Crown Service in North Hollywood?
We often can. Fast dispatch from 7am to 7pm, Sunday through Friday, and same-day visits are part of how we schedule. A missing cap or a badly cracked crown before a forecast of rain is worth calling about sooner rather than later, so water doesn’t get a chance to reach the masonry. We answer 24/7. A call outside dispatch hours is booked into the next opening, Sunday through Friday, 7am to 7pm. Call (833) 589-9860 and we’ll find the soonest slot.
How Do I Know If I Need a Cap or a Crown Repair?
Check your chimney from the ground first. Missing or damaged cap: yes, that needs one. Rust streaks down the flue, a cap that’s tilted, or a cap with a rusted-out screen are signs too. Crown problems show up as cracks in the concrete top, pieces of concrete on the roof, or water stains on the ceiling near the chimney. But the ground-level look only tells you so much. The only reliable check is from the roof, and that’s not a DIY task. That’s the height job we handle. An inspection is part of our sweep, so it’s not a separate service. If we find a problem, we fix it. That’s the difference between a sweep that hands you a report and a contractor who can make it right.
FAQs – Chimney Cap & Crown Cost
How much does a chimney cap cost in North Hollywood?
A standard single-flue cap installed typically runs $185 to $420 in North Hollywood. A multi-flue or custom-fabricated cap runs $340 to $720. The number depends on flue count, cap material, and access. Call (833) 589-9860 for a free estimate, and we’ll quote the exact price for your chimney.
How much does a chimney crown rebuild cost?
A full crown rebuild usually costs $850 to $1,450 in this market, while a crown coating over hairline cracks runs $340 to $620. The range depends on the size of the chimney and how much of the crown has failed. The written estimate sets the final price. Call (833) 589-9860.
Can I get a chimney cap and crown done at the same time?
Yes, and it’s the smart way to do it. Doing both in one visit typically saves a separate dispatch and part of the labor, so the combined price is often lower than two separate jobs. We quote both together so you can see the difference. Call (833) 589-9860.
Is a stainless steel cap worth the extra cost in North Hollywood?
Often yes. Stainless steel and copper cost more up front than galvanized but resist rust far better, and with the intense summer sun and dry heat here, a galvanized cap degrades faster over the years. If you plan to stay in the home, the longer-lasting cap is a better use of money. We stock Gelco caps and can walk you through the choices. Call (833) 589-9860.
Why does my cap keep coming loose or corroding?
A cap that’s coming loose usually wasn’t sized or mounted correctly, or the fasteners weren’t suited to the flue material. Corrosion is typically a galvanized cap that’s aged in the heat and weather. Either way, the fix is a properly sized, properly mounted cap, usually in stainless for durability. A free estimate will confirm it. Call (833) 589-9860.
Why Homeowners Across North Hollywood Call Us for Cap & Crown Work
Ashford Chimney Sweep has been serving the area since 2012, and the reason homeowners keep the relationship going is straightforward: we repair what we find. Too often a sweep will inspect a chimney, hand over a report, and point you to someone else for the actual repair. We handle sweeping, repair, and dryer vent cleaning as one trade under one contractor. That means fewer handoffs and one team accountable for the result. We source caps and venting from the brands certified chimney contractors rely on, including DuraFlex, HeatShield, Gelco, Olympia Chimney, Famco, and Copperfield, not whatever a hardware store happens to carry. We’ve served North Hollywood and the surrounding communities for 14 years, and we’re a full-service Ashford Chimney Sweep operation, handling the flue, liner, cap, crown, and venting as one system. Whether you’re in the older bungalows near the arts district or a mid-century home off Magnolia Boulevard, we can assess and fix the problem in the same relationship.
Our dryer vent cleaning is treated as the fire-safety service it is, with the same care we bring to your chimney. We answer 24/7 and dispatch Sunday through Friday, 7am to 7pm, so we’re reachable when a cap comes loose before a storm. We’re closed Saturday, and a call to our line is always answered by a person, or booked into the next opening if it comes in outside dispatch hours. A free estimate tells you exactly what your chimney needs before any work begins. We’re also proud to serve the North Hollywood area and nearby neighborhoods, and we can talk through the options whether you need a cap, a crown, a liner restore, or a sweep.
If you’re wondering whether the crack in your crown is serious or whether a missing cap needs attention before the next rain, get a free estimate. We’ll show you what’s going on and put the price in writing. The written estimate sets the final price, and there’s no separate call fee, dispatch fee, or trip charge, so the quote is the quote.
Related Services & Guides
- chimney repair
- chimney sweep
- dryer vent cleaning
- chimney cap repair
- chimney crown repair
- chimney liner repair
- chimney inspection
- Los Angeles
- Burbank
- Studio City
- Van Nuys
- chimney cap cost
Contact Us for a Free Estimate
Call (833) 589-9860 for a free estimate on your chimney cap or crown. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. Whether you need a cap replaced, a crown resealed, or a full rebuild, we’ll give you a clear written quote and a straight answer about what your chimney needs. If it’s a quick fix, we’ll tell you. If it needs more, you’ll know before any work starts.
Pricing reflects the North Hollywood market as of 2026. Ashford Chimney Sweep offers free estimates – call (833) 589-9860.
Written by Ashford Chimney Sweep, Owner at Ashford Chimney Sweep, serving North Hollywood since 2012.
What Our Customers Say
"Crown was cracked and taking water. Repaired it rather than quoting a rebuild, which the previous company had pushed hard for."
- Sofia Flores"Swept it, capped it, and installed a proper damper. The downdraft smell in the summer that we'd lived with for years is gone."
- Norma Herrera"Level two inspection before we bought the house. The report was detailed enough to use as a negotiating point and he explained every photo in it."
- Hector Garcia