Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Chimney Company in Glendale, CA
Chimney repair in Glendale usually means working on a 1920s or 1930s brick chimney that has survived the 1994 Northridge earthquake and decades of Santa Ana wind seasons. We’re Ashford Chimney Sweep, and we repair what we find: cracked crowns, failed flashing, spalled brick, and liners that should have been replaced years ago. The older foothill homes concentrated north of downtown hold most of Glendale’s remaining chimneys, and they need a contractor who understands how this housing stock fails. Call (833) 589-9860 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Why Glendale Homes Are Different
Glendale’s chimney work concentrates in the 1920s to 1940s Tudor, Spanish Colonial, and Craftsman houses of the north side, in neighborhoods like Rossmoyne, Verdugo Woodlands, and El Miradero. These are original brick and stucco chimneys, many in rental or multi-family buildings, so a lot of our Glendale service is pre-rental safety checks and landlord-requested inspection work rather than a suburban owner scheduling their annual sweep. The housing stock is the story: newer condos and apartments along Brand Boulevard and Central Avenue have no chimneys at all, which means nearly every job we do is on hillside construction built before modern flue standards existed.
The climate shapes what we find inside those flues. Glendale’s dry, warm conditions mean fireplaces go unused for long stretches, and the October through January Santa Ana winds make homeowners hesitant to light a fire for weeks at a time. That idle period lets soot and creosote harden and glaze in place. A first fall cleaning here often reveals heavy third-degree creosote that a milder, more frequently used fireplace wouldn’t produce. We also check chimney tops for fire-wood rat nests and palm frond debris after windstorms, and we inspect 1920s-era brick for cracked mortar from the 1994 Northridge earthquake. Almost every old foothill chimney shows that failure pattern to some degree.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Our Main Glendale Services
These are the two services Glendale homeowners and landlords call about most often, each with its own page covering local pricing and process.
Chimney Sweep in Glendale
A Chimney Sweep in Glendale on an older foothill home means removing hardened creosote that has baked in place during months of disuse, then checking the flue for the cracks and gaps typical of 1920s brick construction. We inspect the cap, crown, and wash while we’re up there, since wind-driven palm debris and rodent nesting are common in this part of the city. For rental units, we document everything in writing so a property owner has a record for their files. The goal is a clean flue that drafts correctly, not just a brushed-out firebox.
Dryer Vent Cleaning in Glendale
Dryer Vent Cleaning in Glendale matters in older multi-family buildings where vent runs are long, vertical, or shared through walls that no one has opened in decades. Lint accumulates faster in rental units because dryers are used heavily and vent maintenance rarely makes the landlord’s list until something goes wrong. We treat this as fire prevention work: a clogged dryer vent is a leading cause of appliance-related house fires, and the fix is straightforward when caught early. Our techs clear the full run and confirm airflow before they leave.
Chimney Repair in Glendale
Chimney repair on Glendale’s north side usually starts with two findings: cracked mortar from the 1994 Northridge earthquake and a crown that has been letting water into the flue for years. The 1920s through 1940s brick chimneys in neighborhoods like Verdugo Woodlands and Rossmoyne were built well, but seven decades of dry heat and wind-driven debris take a toll. We repair what we find, and because Ashford Chimney Sweep stocks DuraFlex liner systems and HeatShield ceramic restorative, we can often fix the problem the same week we identify it. This is the core of our Chimney Repair work in Glendale: not just an inspection report, but the actual fix.
Chimney Cap Installation
Signs you need it
You can see daylight where a cap should be, or you’ve found bird nesting material, palm fronds, or rat droppings inside the flue.
What it costs in Glendale
Installing a new cap in Glendale typically runs $180 to $450 depending on flue size and whether we’re replacing the mounting as well.
How we do it
We measure the flue opening, select a Gelco stainless cap sized to it, secure it to the crown, and verify the draft isn’t restricted.
Chimney Cap Replacement
Signs you need it
The existing cap is rusted through, dented from falling debris, or the mesh sides have torn open and no longer keep animals out.
What it costs in Glendale
Replacing a deteriorated cap in Glendale typically runs $220 to $500, including removal of the old unit and disposal.
How we do it
We pull the old cap, check the crown for the water damage that usually accompanies a failed cap, then install a properly sized replacement and test the draft.
Chimney Flashing Repair
Signs you need it
You see water stains on the ceiling near the chimney, damp brick after rain, or the flashing has pulled away from the roofline.
What it costs in Glendale
Flashing repair in Glendale typically lands between $350 and $750, since it often involves resealing roof penetrations on steep hillside pitches.
How we do it
We remove the failed flashing, inspect the underlying roof deck for rot, install new step and counter flashing, and seal every transition with the right caulk for tile or composition roofs.
Chimney Liner Installation
Signs you need it
Your chimney has no liner, the existing clay liner is cracked from the Northridge quake, or a camera inspection shows gaps between flue tile sections.
What it costs in Glendale
Installing a DuraFlex stainless liner for a single-flue chimney in Glendale typically runs $1,800 to $4,000, with multi-story hillside homes at the upper end.
How we do it
We size the liner to the appliance, drop it down the flue, insulate where the code requires it, and connect it to the venting with a positive seal at both ends.
What Chimney Repair Costs in Glendale
These are typical ranges for the most common repairs on Glendale’s older chimneys. Your written estimate sets the final price after we see the actual conditions.
| Item | Typical range in Glendale |
|---|---|
| Chimney cap installation | $180 – $450 |
| Chimney cap replacement | $220 – $500 |
| Chimney flashing repair | $350 – $750 |
| Chimney liner installation (DuraFlex) | $1,800 – $4,000 |
How much does chimney repair cost in Glendale?
Most chimney repairs in Glendale run between $180 for a simple cap and $4,000 for a full DuraFlex liner on a multi-story hillside home. We always provide a written estimate before any work begins. Call (833) 589-9860 for an exact quote.
Do old Glendale chimneys need full rebuilding after an earthquake?
Not always. Cracked mortar and spalled brick are common in 1920s chimneys, but many can be repaired with tuckpointing or crown work rather than a full rebuild. We only recommend the repair the camera evidence supports. Call (833) 589-9860 to schedule an inspection.
Brands We Service in Glendale
We work with the professional-grade brands that certified chimney contractors use nationwide: HeatShield ceramic restorative, Gelco caps, and Olympia Chimney supply components. We keep common parts on hand for faster turnaround on Glendale jobs. See our brands for the full list.
See the difference
Before
After
Before
After
Before
AfterPricing for Chimney Company in Glendale, CA
Every estimate is free, and the final price is set by written estimate before work starts. Here’s what Glendale homeowners can expect for common chimney and venting work.
| Service | Typical range in Glendale |
|---|---|
| Chimney sweep (standard cleaning) | $180 – $340 |
| Chimney cap installation | $180 – $450 |
| Chimney crown repair | $300 – $750 |
| Chimney flashing repair | $350 – $750 |
| Chimney liner installation (DuraFlex) | $1,800 – $4,000 |
| HeatShield liner restoration | $900 – $2,500 |
| Dryer vent cleaning | $120 – $250 |
In Glendale, price goes up when a chimney is on a steep hillside lot with limited roof access, when the flue hasn’t been opened in years, or when earthquake-related cracking means more than one repair is needed at once. We don’t start work without a written estimate, and we never upsell a repair the camera footage doesn’t show.
Neighborhoods We Serve in Glendale
Most of our Glendale work centers on the older foothill and hillside neighborhoods where the original chimneys still stand. We know the access issues, roof pitches, and 1920s-era construction patterns in these areas.
We regularly work in:
- Verdugo Woodlands
- Rossmoyne
- El Miradero
- Glenwood
- Moorpark
Response times vary by neighborhood, but most Glendale appointments can be scheduled within a few days. Call (833) 589-9860 and we’ll give you a straight answer on timing.
Service Area – Cities Near Glendale
Beyond Glendale, our service area covers the surrounding communities. We work in Burbank, CA, over in Hollywood, CA, up in Toluca Lake, CA, and across the NoHo Arts District, CA. If you’re in one of these areas, the same crew and the same pricing apply.
Serving Glendale, CA – Our Local Coverage Area
We serve Glendale and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs About Chimney Company in Glendale
We answer 24/7. A call outside dispatch hours is booked into the next opening, Sunday through Friday, 7am to 7pm. Most Glendale appointments can be scheduled within a few days, and we tell you the window when you call. Fast dispatch from 7am to 7pm, Sunday through Friday.
Most standard chimney sweeps and cap replacements don’t require a permit, but liner installations and structural repairs sometimes do. We’ll check with Glendale’s building department before starting any work that might need one, and we’ll include that in your written estimate.
Yes, a significant share of our Glendale work is for landlords and property managers. We document every inspection and repair in writing, and we photograph the conditions we find so there’s a clear record for the owner and tenant. Pre-rental safety checks are one of the most common calls we take.
If you own an older Glendale chimney, don’t wait for the first fall fire to find out what’s inside it. Call (833) 589-9860 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
What happens when you call
- 1A real person answersNo phone trees. Talk to a local chimney cleaning pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you. The visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Glendale Customers Say
"Fireplace had never drawn properly since we moved in. He found the damper was only opening halfway due to a bent linkage and fixed it in ten minutes."
- Luis Morales"Crown was cracked and taking water. Repaired it rather than quoting a rebuild, which the previous company had pushed hard for."
- Sofia Flores"Swept it, capped it, and installed a proper damper. The downdraft smell in the summer that we'd lived with for years is gone."
- Norma Herrera